View ASMT-JY30-ARRN1ASMT-JY30-ARRN1_3748181.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

asmt-jx3x 3w mini power led light source data sheet description the 3w mini power led light source is a high perfor- mance energy ecient device which can handle high thermal and high driving current. option with electrically isolated metal slug is also available. the white mini power led is available in the range of color temperature from 2700k to 10000k. the low prole package design and ultra small footprint is suitable for a wide variety of applications especially where space and height is a constraint. the package is compatible with reow soldering process. to facilitate easy pick & place assembly, the leds are packed in eia-compliant tape and reel. features available in red, red orange, amber, green, blue, royal blue, cool white, neutral white and warm white small footprint and low prole symmetrical outline energy ecient direct heat transfer from metal slug to mother board compatible with reow soldering process high current operation long operation life wide viewing angle silicone encapsulation non-esd sensitive (threshold > 16kv) msl 1 products applications sign backlight safety, exit and emergency sign lightings specialty lighting such as task lighting and reading lights retail display commercial lighting accent or marker lightings, strip or step lightings portable lightings, bicycle head lamp, torch lights. decorative lighting architectural lighting pathway lighting street lighting pedestrian street lighting tunnel lighting caution: customer is advised to keep the leds in the mbb when not in use as prolonged exposure to environment might cause the silver plated leads to tarnish, which might cause diculties in soldering.
2 package dimensions notes: 1. all dimensions in millimeters. 2. metal slug is connected to anode for electrically non-isolated option. 3. tolerance is 0.1 mm unless otherwise specied. 4. terminal nish: ag plating. 5. corresponding nc (no connection) leads adjacent to anode and cathode leads can be electrically short. figure 1. asmt-jx3x package outline drawing 5 . 0 4 . 0 4 . 0 0 . 7 1 . 0 0 .3 1 . 85 ? 3. 7 0 . 8 0 . 65 0 . 60 ? 1 . 70 b od y c a t hode l ead l ens c a t hode mark anode l ead nc nc nc nc me t a l s l ug
3 part n umbering s y stem note: 1. please refer to page 10 for selection details. asmt- j x 1 3 x 2 C x 3 x 4 x 5 x 6 x 7 packaging option color bin selection maximum flux bin selection minimum flux bin selection dice type n C ingan a C alingap heat sink 0 C electrically non-isolated 1 C electrically isolated color r C red h C red orange a C amber g C green b C blue l C royal blue w C cool white n C neutral white y C warm white device selection guide (t j = 2 5 c ) part n umber c olor l uminous flux (lm) / radiometric power (mw), v [1,2] test c urrent (ma) dice technolog y electricall y isolated metal slug min. t y p. max. asmt-jr30-ars01 red 39.8 45.0 67.2 350 allngap no asmt-jh30-ars01 red orange 39.8 45.0 67.2 350 allngap no asmt-ja30-ars01 amber 39.8 45.0 67.2 350 allngap no asmt-jg31-nst01 green 51.7 70.0 87.4 350 ingan yes asmt-jb31-nmp01 blue 13.9 20.0 30.6 350 ingan yes asmt-jl31-npq01 royal blue 355 mw 435 mw 515 mw 350 ingan yes asmt-jw31-ntv01 cool white 67.2 85.0 113.6 350 ingan yes asmt-jw31-nuv01 87.4 95.0 113.6 350 ingan yes asmt-jn31-ntv01 neutral white 67.2 85.0 113.6 350 ingan yes asmt-jn31-nuv01 87.4 95.0 113.6 350 ingan yes asmt-jy31-nsu01 warm white 51.7 70.0 99.6 350 ingan yes notes: 1. v is the total luminous ux / radiometric power output as measured with an integrating sphere at 25ms mono pulse condition. 2. flux tolerance is 10 %
4 optical c haracteristics at 3 50 ma (t j = 2 5 c ) part n umber c olor peak wavelength, peak (nm) dominant wavelength, d [1] (nm) viewing angle, 2 ? [2] () l uminous ecienc y (lm/w) t y p. t y p. t y p. t y p. asmt-jr30-ars01 red 635 625 165 56 asmt-jh30-ars01 red orange 625 615 165 56 asmt-ja30-ars01 amber 598 590 165 56 asmt-jg31-nst01 green 519 525 165 59 asmt-jb31-nmp01 blue 460 470 165 17 asmt-jl31-npq01 royal blue 450 455 165 not applicable part n umber c olor c orrelated c olor temperature, cc t (kelvin) viewing angle, 2 ? [2] () l uminous ecienc y (lm/w) min. max. t y p. t y p. asmt-jw31-ntv01 cool white 4500 10000 140 71 asmt-jw31-nuv01 4500 10000 140 80 asmt-jn31-ntv01 neutral white 3500 4500 140 71 asmt-jn31-nuv01 3500 4500 140 80 asmt-jy31-nsu01 warm white 2700 3500 140 59 notes: 1. the dominant wavelength, d , is derived from the cie chromaticity diagram and represents the color of the device. 2. ? is the o-axis angle where the luminous intensity is ? the peak intensity. absolute maximum ratings parameter allngap inga n units dc forward current [1] 700 700 ma peak pulsing current [2] 1000 1000 ma power dissipation 2450 3010 mw led junction temperature 125 135 c operating metal slug temperature range at 350 ma -40 to +115 -40 to +120 c operating metal slug temperature range at 700 ma -40 to +100 -40 to +105 c storage temperature range -40 to +120 -40 to + 135 c soldering temperature refer to figure. 25 reverse voltage [3] not recommended note: 1. derate linearly based on figure 9 for alingap and figure 21 for ingan. 2. pulse condition duty factor = 10%, frequency = 1 khz. 3. not designed for reverse bias operation.
5 electrical c haracteristic at 3 50 ma (t j = 2 5 c ) dice t y pe forward voltage, v f (volts) thermal resistance, r j-ms ( c /w) [1] min. t y p max. t y p. allngap 1.9 2.3 2.6 9 ingan 2.8 3.4 3.7 9 note: 1. r j-ms is thermal resistance from led junction to metal slug. optical and electrical c haracteristic at 700 ma (tj = 2 5 c ) part n umber c olor l uminous flux (lm) / radiometric power (mw), v forward voltage, v f (volts) t y p. t y p. asmt-jr30-ars01 red 80.0 2.7 asmt-ja30-ars01 amber 80.0 2.7 asmt-jh30-ars01 red orange 80.0 2.7 asmt-jg31-nst01 green 120.0 3.8 asmt-jb31-nmp01 blue 34.0 3.8 asmt-jl31-npq01 royal blue 740 mw 3.8 asmt-jw31-ntv01 cool white 150.0 3.8 asmt-jw31-nuv01 160.0 3.8 asmt-jn31-ntv01 neutral white 150.0 3.8 asmt-jn31-nuv01 160.0 3.8 asmt-jy31-nsu01 warm white 120.0 3.8
6 figure 2. relative intensit y vs. wavelength for red, red orange and amber. figure 3. relative l uminous flux vs. mono pulse c urrent. alingap figure 4 . forward c urrent vs. forward voltage. figure 5 . radiation pattern red, red orange and amber. figure 6 . maximum pulse current vs. ambient temperature. derated based on t a = 2 5 c , r j-a = 3 0 c /w. figure 7 . maximum pulse current vs. ambient temperature. derated based on t a = 85 c , r j-a = 3 0 c /w. 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.00001 0.0001 0.001 0.01 0.1 1 10 100 p ul s e d urati o n, t p - s ec p ul s e c urrent, i p - a 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.00001 0.0001 0.001 0.01 0.1 1 10 100 p ul s e d urati o n, t p - s ec p ul s e c urrent, i p - a d = 0.05 0.10 0.25 0.50 1.00 d = t p t t p i f t d = t p t t p i f t d = 0.05 0.10 0.25 0.50 1.00 0 0. 1 0.2 0. 3 0.4 0.5 0.6 0. 7 0.8 0. 9 1 -9 0 - 60 -3 00 3 060 9 0 an g ular disp la c e m en t - d e g ree s n o r m al iz e d i n t en sity 0 0. 1 0.2 0. 3 0.4 0.5 0.6 0. 7 0.8 0. 9 1 5 3 0 545 560 5 7 55 9 0 605 620 6 3 5 650 665 680 w a v elen gth - nm rela tiv e i n t en sity 0 0.2 0.4 0.6 0.8 1 1 .2 1 .4 1 .6 1 .8 2 0 1 00 200 3 00 400 500 600 7 00 mo n o p ul s e c urren t - m a rela tiv e lu mi n o u s f lu x ( n o r m al iz e d a t 3 50 m a ) re d o ran g e a mb er re d 0 50 1 00 1 50 200 250 3 00 3 50 400 450 500 550 600 650 7 00 0 0.5 11 .5 2 2.5 3 fo r w ar d vo l t a g e - v fo r w ar d c urren t - m a
7 0.0 20.0 40.0 60.0 80.0 1 00.0 1 20.0 1 40.0 1 60.0 1 80.0 200.0 220.0 240.0 - 50 - 25 0 25 50 7 5 1 00 1 25 j un ctio n t e mp era t ure, t j - c rela tiv e l ight o u tp u t - % ( n o r m al iz e d a t 25 c) - 0. 3 0 - 0.20 - 0. 1 0 0.00 0. 1 0 0.20 0. 3 0 0.40 - 50 - 25 0 25 50 7 5 1 00 1 25 j un ctio n t e mp era t ure, tj - c fo r w ar d vo l t a g e shift - v ( n o r m al iz e d a t 25 c) a mb er re d re d o ran g e 0 1 00 200 3 00 400 500 600 7 00 800 0 20406080 1 00 1 20 1 40 m e t al s lu g t e mp era t ure, t ms - c m a x all ow a b le dc c urren t - m a r j-ms = 9c/w 0 1 00 200 3 00 400 500 600 7 00 800 0 20406080 1 00 1 20 1 40 a mbi en t t e mp era t ure, t a - c m a x all ow a b le dc c urren t - m a r j- a = 20 c/w r j- a = 25 c/w r j- a = 3 0 c/w a mb er re d re d-o ran g e figure 8 . relative l ight output vs. junction temperature. figure 9. forward voltage shift vs. junction temperature. figure 1 0 . maximum forward c urrent vs. ambient temperature. derated based on t jmax = 12 5 c , r j-a = 2 0 c /w, 2 5 c /w and 3 0 c /w. figure 11. maximum forward c urrent vs. ambient temperature. derated based on t jmax = 12 5 c , r j-ms = 9 c /w.
8 0.0 0. 1 0.2 0. 3 0.4 0.5 0.6 0. 7 0.8 0. 9 1 .0 3 80 4 3 0 480 5 3 0 580 6 3 0 680 73 0 7 80 w a v elen gth - nm rela tiv e i n t en sity w ar m whit e coo l whit e 0 0. 1 0.2 0. 3 0.4 0.5 0.6 0. 7 0.8 0. 9 1 3 80 405 4 3 0 455 480 505 5 3 0 555 580 605 6 3 0 w a v elen gth - nm rela tiv e i n t en sity g reen b lue r oy al b lue 0 0.2 0.4 0.6 0.8 1 1 .2 1 .4 1 .6 1 .8 2 0 1 00 200 3 00 400 500 600 7 00 mo n o p ul s e c urren t - m a rela tiv e lu mi n o u s f lu x ( n o r m al iz e d a t 3 50 m a ) 0 0. 1 0.2 0. 3 0.4 0.5 0.6 0. 7 0.8 0. 9 1 -9 0 - 60 -3 00 3 060 9 0 an g ular disp la c e m en t - d e g ree s n o r m al iz e d i n t en sity b lue g reen 0 0. 1 0.2 0. 3 0.4 0.5 0.6 0. 7 0.8 0. 9 1 -9 0 - 60 -3 00 3 060 9 0 an g ular disp la c e m en t - d e g ree s n o r m al iz e d i n t en sity 0 50 1 00 1 50 200 250 3 00 3 50 400 450 500 550 600 650 7 00 0 0.5 11 .5 2 2.5 33 .5 4 fo r w ar d vo l t a g e - v fo r w ar d c urren t - m a inga n figure 12. relative intensit y vs. wavelength for c ool and warm white. figure 13. relative intensit y vs. wavelength for b lue and green. figure 1 4 . relative l uminous flux vs. mono pulse c urrent. figure 1 5 . forward c urrent vs. forward voltage. figure 1 6 . radiation pattern for b lue and green. figure 1 7 . radiation pattern for c ool white and warm white.
9 0 1 00 200 3 00 400 500 600 7 00 800 0 20406080 1 00 1 20 1 40 a mbi en t t e mp era t ure, t a - c m a x all ow a b le dc c urren t - m a r j- a = 20 c/w r j- a = 25 c/w r j- a = 3 0 c/w 0 1 00 200 3 00 400 500 600 7 00 800 020406080 1 00 1 20 1 40 m e t al s lu g t e mp era t ure, t ms - c m a x all ow a b le dc c urren t - m a r j-ms = 9c/w 0.0 1 0.0 20.0 3 0.0 40.0 50.0 60.0 7 0.0 80.0 9 0.0 1 00.0 11 0.0 1 20.0 - 50 - 25 0 25 50 7 5 1 00 1 25 1 50 j un ctio n t e mp era t ure, t j -c j un ctio n t e mp era t ure, t j -c rela tiv e l ight o u tp u t - % ( n o r m al iz e d a t 25 c) - 0.25 - 0.20 - 0. 1 5 - 0. 1 0 - 0.05 0.00 0.05 0. 1 0 0. 1 5 0.20 0.25 - 50 - 25 0 25 50 7 5 1 00 1 25 1 50 fo r w ar d vo l t a g e shift - v ( n o r m al iz e d a t 25 c) b lue r oy al b lue g reen whit e b lue r oy al b lue whit e g reen figure 2 0 . relative l ight output vs. junction temperature. figure 21. forward voltage shift vs. junction temperature. figure 22. maximum forward c urrent vs. ambient temperature. derated based on t jmax = 13 5 c , r j-a = 2 0 c /w, 2 5 c /w and 3 0 c /w figure 23. maximum forward c urrent vs. metal slug temperature. derated based on t jmax = 13 5 c , r j-ms = 9 c /w figure 1 8 . maximum pulse current vs. ambient temperature. derated based on t a = 2 5 c , r j-a = 3 0 c /w figure 19. maximum pulse current vs. ambient temperature. derated based on t a = 85 c , r j-a = 3 0 c /w 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.00001 0.0001 0.001 0.01 0.1 1 10 100 p ul s e c urrent, i p - a 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.00001 0.0001 0.001 0.01 0.1 1 10 100 p ul s e d urati o n, t p ec p ul s e c urrent, i p - a p ul s e d urati o n, t p - s ec d = t p t t p i f t d = 0.05 0.10 0.25 0.50 1.00 d = t p t t p i f t d = 0.05 0.10 0.25 0.50 1.00
10 ( a cc . to j-std- 020 c) 2 17c 200 c 60 - 1 20 s e c . 6 c/s e c . m a x . 3c/s e c . m a x . 3c/s e c . m a x . 1 50 c 255 - 260 c 1 00 s e c . m a x . 1 0 - 3 0 s e c . tim e t e mp era t ure figure 2 6 . recommended reow soldering prole note: for detail information on reow soldering of avago surface mount leds, do refer to avago application note an 1060 surface mounting smt led indicator components. figure 2 4 . recommended soldering land pattern figure 2 5 . recommended pick and place nozzle tip. inner diameter = 3.2 mm so ld er pa d so ld er pa d s l ug i n d ep d en t 0.80 0.85 1. 7 5 1. 3 2 ? 1. 9 0 3 .50 5.20 ? 3 .2
11 option selection details asmt-j x 1 3 x 2 C x 3 x 4 x 5 x 6 x 7 x 4 C minimum flux bin selection x 5 C maximum flux bin selection x 6 C color bin selection x 7 C packaging option flux b in l imit [x 4 , x 5 ] c olor b in id l uminous flux (lm)/ radiometric power (mw) at 3 50 ma min. max. blue m 13.9 18.1 n 18.1 23.5 p 23.5 30.6 q 30.6 39.8 other colors r 39.8 51.7 s 51.7 67.2 t 67.2 87.4 u 87.4 99.6 v 99.6 113.6 royal blue m 225.0 275.0 n 275.0 355.0 p 355.0 435.0 q 435.0 515.0 tolerance for each bin limits is 10% w arm white selection b in id 0 full distribution e nm, mm, n1 and m1 f pm, nm, p1 and n1 g qm, pm, q1 and p1 h m1, n1, m0 and n0 j p1, n1, p0 and n0 k q1, p1, q0 and p0 l n0, m0, na and ma m p0, n0, pa and na n q0, p0, qa and pa c ool white selection b in id 0 full distribution e vm, um, vn and un f wm, vm, wn and vn g xm, wm, xn and wn h un, vn, u0 and v0 j wn, vn, w0 and v0 k xn, wn, x0 and w0 l v0, u0, vp and up m w0, v0, wp, vp and wq n x0, w0, xp, wp and wq p y0 q ya c olor b in selection (x 6 ) individual reel will contain parts from one color bin selection only. other c olors selection b in id 0 full distribution z a and b y b and c w c and d v d and e q a, b and c p b, c and d n c, d and e m d, e and f n eutral white selection b in id 0 full distribution e sm, rm, s1 and r1 f tm, sm, tn and s1 g s1, r1, s0 and r0 h tn, s1, t0 and s0 j s0, r0, sa and ra k t0, s0, tp and sa
12 figure 29. c olor bin structure for n eutral white 0. 3 2 0. 3 4 0. 3 6 0. 3 8 0.40 0.42 0.44 0.46 0. 3 40. 3 60. 3 8 0.40 0.42 0.44 x-coo r di na t e y-coo r di na t e r m r 1 r0 ra t 0 sm s1 s a tm t n tp s 0 4500 k b la ck body c ur v e 4 1 00 k 3 800 k 3 500 k 0.26 0.28 0. 3 0 0. 3 2 0. 3 4 0. 3 6 0. 3 8 0.40 0.42 0.26 0.28 0. 3 00. 3 20. 3 40. 3 60. 3 8 0.40 x-coo r di na t e y-coo r di na t e 1 0000 k 7 000 k 6 3 00 k 5000 k 4500 k y 0 y a u m un u p v 0 vm v n vp x 0 xp xm x n w 0 wq 0. 3 2 0. 3 4 0. 3 6 0. 3 8 0.40 0.42 0.44 0.46 0.48 0. 3 8 0.40 0.42 0.44 0.46 0.48 0.50 x-coo r di na t e y-coo r di na t e qm mm n m q1 q a p1 m 0 m1 m a na 3 050 k 2850 k 3 500 k 3 250 k 2 7 00 k pm q 0 p 0 p a b la ck body c ur v e n 1 n0 u0 wm w n wp 5650 k b la ck body c ur v e figure 2 7 . c olor bin structure for c ool white figure 2 8 . c olor bin structure for warm white
13 c olor b in l imits c ool white c olor l imits ( c hromaticit y c oordinates) bin um x y 0.365 0.386 0.367 0.400 0.348 0.385 0.347 0.372 bin un x y 0.365 0.386 0.362 0.372 0.346 0.359 0.347 0.372 bin u0 x y 0.362 0.372 0.360 0.357 0.344 0.344 0.346 0.359 bin up x y 0.360 0.357 0.357 0.342 0.343 0.331 0.344 0.344 bin vm x y 0.329 0.357 0.329 0.369 0.348 0.385 0.347 0.372 bin vn x y 0.329 0.345 0.329 0.357 0.347 0.372 0.346 0.359 bin v0 x y 0.329 0.331 0.329 0.345 0.346 0.359 0.344 0.344 bin vp x y 0.329 0.331 0.344 0.344 0.343 0.331 0.329 0.320 bin wm x y 0.329 0.369 0.329 0.357 0.315 0.344 0.314 0.355 bin wn x y 0.329 0.345 0.316 0.333 0.315 0.344 0.329 0.357 bin w0 x y 0.329 0.345 0.329 0.331 0.317 0.320 0.316 0.333 bin wp x y 0.329 0.331 0.329 0.320 0.318 0.310 0.317 0.320 bin wq x y 0.329 0.320 0.329 0.310 0.319 0.300 0.318 0.310 bin xm x y 0.301 0.342 0.314 0.355 0.315 0.344 0.303 0.333 bin xn x y 0.305 0.322 0.303 0.333 0.315 0.344 0.316 0.333 bin x0 x y 0.308 0.311 0.305 0.322 0.316 0.333 0.317 0.320 bin xp x y 0.308 0.311 0.317 0.320 0.319 0.300 0.311 0.293 bin yo x y 0.308 0.311 0.283 0.284 0.274 0.301 0.303 0.333 bin ya x y 0.308 0.311 0.311 0.293 0.290 0.270 0.283 0.284 tolerance: 0.01 warm white c olor l imits ( c hromaticit y c oordinates) bin mm x y 0.471 0.451 0.460 0.430 0.473 0.432 0.486 0.455 bin m1 x y 0.460 0.430 0.453 0.416 0.467 0.419 0.473 0.432 bin m0 x y 0.453 0.416 0.444 0.399 0.459 0.403 0.467 0.419 bin ma x y 0.459 0.403 0.444 0.399 0.436 0.384 0.451 0.389 bin nm x y 0.454 0.446 0.444 0.426 0.460 0.430 0.471 0.451 bin n1 x y 0.444 0.426 0.438 0.412 0.453 0.416 0.460 0.430 bin n0 x y 0.438 0.412 0.429 0.394 0.444 0.399 0.453 0.416 bin na x y 0.444 0.399 0.429 0.394 0.422 0.379 0.436 0.384 bin pm x y 0.438 0.440 0.430 0.421 0.444 0.426 0.454 0.446 bin p1 x y 0.430 0.421 0.424 0.407 0.438 0.412 0.444 0.426 bin p0 x y 0.424 0.407 0.416 0.389 0.429 0.394 0.438 0.412 bin pa x y 0.429 0.394 0.416 0.389 0.410 0.374 0.422 0.379 bin qm x y 0.421 0.433 0.414 0.414 0.430 0.421 0.438 0.440 bin q1 x y 0.414 0.414 0.409 0.400 0.424 0.407 0.430 0.421 bin q0 x y 0.409 0.400 0.402 0.382 0.416 0.389 0.424 0.407 bin qa x y 0.416 0.389 0.402 0.382 0.396 0.367 0.410 0.374 tolerance: 0.01
14 n eutral white c olor l imits ( c hromaticit y c oordinates) bin rm x y 0.421 0.433 0.414 0.414 0.397 0.406 0.402 0.423 bin r1 x y 0.414 0.414 0.409 0.400 0.392 0.391 0.397 0.406 bin r0 x y 0.392 0.391 0.387 0.374 0.402 0.382 0.409 0.400 bin ra x y 0.387 0.374 0.383 0.360 0.396 0.367 0.402 0.382 bin sm x y 0.402 0.423 0.397 0.406 0.382 0.397 0.386 0.413 bin s1 x y 0.397 0.406 0.392 0.391 0.378 0.382 0.382 0.397 bin s0 x y 0.392 0.391 0.387 0.374 0.374 0.366 0.378 0.382 bin sa x y 0.387 0.374 0.383 0.360 0.370 0.351 0.374 0.366 bin tm x y 0.386 0.413 0.382 0.397 0.365 0.386 0.367 0.400 bin tn x y 0.382 0.397 0.378 0.382 0.362 0.372 0.365 0.386 bin t0 x y 0.378 0.382 0.374 0.366 0.360 0.357 0.362 0.372 bin tp x y 0.374 0.366 0.370 0.351 0.357 0.342 0.360 0.357 tolerance: 0.01 c olor b in id dominant wavelength (nm) at 3 50 ma min. max. red C 620.0 635.0 red orange C 610.0 620.0 amber b 587.0 589.5 c 589.5 592.0 d 592.0 594.5 e 594.5 597.0 blue a 460.0 465.0 b 465.0 470.0 c 470.0 475.0 d 475.0 480.0 green a 515.0 520.0 b 520.0 525.0 c 525.0 530.0 d 530.0 535.0 tolerance: 1 nm example asmt-jg31- n st 0 1 asmt-jg31-nxxxx C green, ingan, electrically isolated heat sink x 4 = s C minimum flux bin s x 5 = t C maximum flux bin t x 6 = 0 C full distribution x 7 = 1 C tape and reel option packaging option [x 7 ] selection option 1 tape and reel c olor b in id peak wavelength (nm) at 3 50 ma min. max. royal blue c 440.0 445.0 d 445.0 450.0 e 450.0 455.0 f 455.0 460.0 tolerance: 2 nm
15 tape and reel C option 1 figure 3 0 . c arrier tape dimensions notes: 1. empty component pockets sealed with top cover tape. 2. 250 or 500 pieces per reel. 3. drawing not to scale. 4. all dimensions are in millimeters. figure 31. reel dimensions 17 8 1 4 0.5 5 0.5 3 0.5 ? 2 1 .0 0.5 ? 1 0 ? 13 . 1 0.5 ? 60 0.5 13 .2 .5 1 6.0 .5 4.00 . 1 0 8.00 . 1 0 1 2.00 + . 3 0 ? . 1 0 4. 1 5 . 1 0 0.25 0.02 2.05 . 1 0 8 ? 1 .5 0.25 2.00 .05 5.50 .05 1 . 7 5 0.0 1 0.25 0.02 2.0 1 0. 1 ? 1 .5 0. 1 5 5.25 . 1 0
disclaimer: avagos products and software are not specically designed, manufactured or authorized for sale as parts, components or assemblies for the planning, construction, maintenance or direct operation of a nuclear facility or for use in medical devices or applications. customer is solely responsible, and waives all rights to make claims against avago or its suppliers, for all loss, damage, expense or liability in connection with such use. for product information and a complete list of distributors, please go to our web site: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies in the united states and other countries. data subject to change. copyright ? 2005-2010 avago technologies. all rights reserved. av02-1941en - april 14, 2010 c a thod e sid e u s er f ee d di re ctio n p r i n t e d la b el figure 32. reeling orientation

▲Up To Search▲

Price & Availability of ASMT-JY30-ARRN1ASMT-JY30-ARRN1

	To Download ASMT-JY30-ARRN1ASMT-JY30-ARRN1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .